Scissor Aerial Work Platform - 315" Lift Height with 990lb Capacity

EKKO ES80E Scissor Aerial Work Platform – 990 lb Capacity, 26.2 ft Raised Height

The EKKO ES80E Scissor Aerial Work Platform is an electric, lead acid powered scissor lift designed for contractors and trades professionals who need reliable elevated access for lifting, transporting, and positioning loads. With a 990 lb load capacity and a raised height of 26.2 feet (315 inches), this unit is built for demanding jobsite applications where both reach and payload matter. The steel-constructed platform measures 89 inches in length by 45 inches in width, providing ample working space for personnel and materials.

Equipped with a Curtis Controller and four-wheel configuration, the ES80E offers precise, responsive drive and lift control that operators depend on in professional environments. It complies with GB25849 and EN280 standards, and is backed by a 3-year limited warranty, providing confidence in both safety and long-term reliability.

Technical Specifications

Key Features & Benefits

990 lb Load Capacity

At 990 lb, the ES80E can carry meaningful payloads of personnel plus tools and materials in a single lift cycle. For contractors working at height, this reduces trips and increases jobsite efficiency.

26.2 ft Raised Height

A raised height of 26.2 feet (315 inches) gives crews access to elevated ceilings, overhead systems, and building facades that shorter platforms cannot reach. This range makes the ES80E practical across a wide variety of commercial and industrial applications.

Curtis Controller

The Curtis Controller provides precise drive and lift control, which is important for maneuvering in confined spaces and positioning the platform accurately at height. It is the same controller platform used across EKKO's professional-grade lift and forklift lineup.

Steel Construction

The all-steel platform and scissor frame deliver the structural durability required for repeated use in construction environments. Steel construction contributes to the unit's ability to support the full 990 lb rated capacity reliably over time.

Four-Wheel Configuration

Four wheels provide a stable footprint and balanced load distribution, which is critical for safe elevated operation. This configuration supports controlled maneuvering during transport across the jobsite.

GB25849 and EN280 Standards Compliance

Compliance with GB25849 and EN280 means the ES80E has been built to recognized safety standards for mobile elevating work platforms. This gives contractors and site managers confidence that the unit meets established safety requirements.

3-Year Limited Warranty

The 3-year limited warranty provides contractors with extended coverage that reduces risk on capital equipment purchases. This level of warranty support reflects EKKO's commitment to long-term product reliability.

Common Applications

Overhead Installation Work

The 26.2 ft raised height allows electricians, HVAC technicians, and mechanical contractors to reach overhead systems in commercial and industrial buildings without scaffolding setup.

Material Lifting and Positioning

The 990 lb capacity and extendable platform enable workers to lift and position materials such as ductwork, conduit, and building components safely at height.

Facility Maintenance

Building maintenance teams can use the ES80E for tasks such as light fixture replacement, ceiling tile work, and inspection of elevated building systems.

Construction Finishing Work

Contractors performing drywall, painting, or finish work on high interior walls and ceilings benefit from the platform's generous working area (89" x 45") and load capacity.

Compatible Materials

• Smooth concrete floors (indoor use)
• Level hard surface flooring
• Commercial and industrial floor surfaces suitable for electric scissor lifts